|
Display
|
Up-to three simultaneously operating display interfaces:
• Parallel 24-bit display interface – up-to 1920x1080@60Hz
• HDMI 1.4 interface – up-to 1920x1080@60Hz
• MIPI/DSI, 4 lanes @ 1 Gbps
|
+
|
|
• LVDS interfaces – up-to 1920x1080@60Hz
|
L
|
|
USB
|
1 USB3.0 OTG port
|
U1
|
|
1 USB3.0 OTG + 3 host USB2.0 ports
|
U4
|
|
SATA
|
SATA II interface, 3.0 Gbps, integrated controller and PHY
|
+
|
|
Serial Ports
(UARTs)
|
1 RS-232 port, rx/tx only, RS-232 levels (precludes 1 UART port)
|
+
|
|
Up to 5 UART ports, 16C750 compatible, 1.8V interface, up to 3.7 Mbps
|
+
|
|
Audio
|
On-board audio codec with analog stereo output, stereo input and electret microphone support
|
A
|
|
Up to 2 I2S compliant digital audio interfaces (McBSP)
|
+
|
|
HDMI audio output
|
+
|
|
Digital microphone interface with support for up-to 3 digital stereo microphones
|
+
|
|
Ethernet
|
100Base-T Ethernet interface implemented with the Microchip LAN9730 controller
|
E
|
|
Camera
|
Parallel camera interface, up-to 16-bit wide (precludes serial camera interfaces)
• Up to 148.5MPix/s
• BT656 and SYNC mode (HS, VS, FIELD, WEN).
Up to 3 simultaneously operating serial camera ports (preclude parallel camera interface) with MIPI D-PHY v1.0 / SMIA CCP2 compliant PHY receivers up to 1.5 Gbps (750 MHz) per lane.
• MIPI-CSI-A interface with up-to 4 data lanes.
• MIPI-CSI-B interface with up-to 2 data lanes.
• MIPI-CSI-C interface with a single data lane.
|
+
|
|
RTC
|
Real time clock, powered by external lithium battery
|
+
|
|
Touchscreen
Controller
|
TSC2046 touchscreen controller. Supports 4-wire resistive panels
|
I
|
|
MMC/SD/SDIO
|
Up to 3 MMC/SD/SDIO interfaces (3V levels), support HC MMC and SDHC up to 32GB:
|
|
|
SDCARD – 4-bit wide, bootable interface (3V levels)
|
+
|
|
WLSDIO (1.8V levels) (precludes WiFi & Bluetooth)
|
WB
|
|
SDIO4 – 1/4/8bit transfer modes (1.8V levels)
|
+
|
|
WiFi and
Bluetooth
|
Implements 802.11b/g/n wireless connectivity standard
Based on Marvell 88W8787. On-board connector for external antenna
Bluetooth 3.0 + High Speed (HS) (also compliant with Bluetooth 2.1 + EDR)
|
WB
|
|
General
Purpose I/O
|
Up to 106 multifunction signals. Can be used as GPIO (shared with other functions)
|
+
|
|
I2C
|
Up to 4 I2C interfaces (up to 3.4Mbps)
|
+
|
|
SPI
|
Up to 3 SPI (eCSPI) bus interfaces
|
+
|
|
HDQ /1-Wire
|
HDQ/1-Wire compliant interface supporting data rates of up to 5Kbps
|
+
|
|
JTAG
|
OMAP5432 SoC JTAG interface
|
+
|
Если Вы заметили ошибку, то, пожалуйста, выделите фрагмент текста с помощью клавиатуры и нажмите Ctrl+Enter